sdr51
New Member
Posts: 31
|
Post by sdr51 on Dec 13, 2023 8:07:16 GMT
Could anyone help with the details of the rear brake pedal mount for 37 Bike.I have the pedal which has a 3/4” hole in it and I presume it then has possibly a flanged bush that mounts it on the 1/2” shaft across the frame, thanks for any help David Roper
|
|
|
Post by cottonjo on Dec 13, 2023 9:00:39 GMT
I have a 1932 and a 1934. The 1932 is exactly as you say a stepped/flanged bush that prevents the pedal binding when you tighten the nut. My 1932 has the brake on the right and the 1934 on the left. I’m in the process of moving it from the left to the right to make it the same. It’s all a bit congested in that area. If you need more detailed information let me know. Paul S
|
|
sdr51
New Member
Posts: 31
|
Post by sdr51 on Dec 13, 2023 9:45:58 GMT
Thanks Paul,is the bush brass/bronze/steel and could you tell me approx width of flange,David
|
|
|
Post by cottonjo on Dec 13, 2023 10:10:06 GMT
From memory I think it is all steel. Will check it out and let you know. May take a day or so . Paul
|
|
|
Post by cottonjo on Dec 13, 2023 12:11:08 GMT
Hi David, I was not quite correct. It is a straight bush made of steel, slightly longer than the hole in the pedal, with a groove for grease to circulate. Will send you a picture Paul
|
|
|
Post by cottonjo on Dec 13, 2023 12:21:46 GMT
|
|
sdr51
New Member
Posts: 31
|
Post by sdr51 on Dec 13, 2023 12:30:02 GMT
Great thanks
|
|
prox8
New Member
Posts: 7
|
Post by prox8 on Apr 1, 2024 15:46:01 GMT
This photo helps me too. TVM
|
|